IPC Mini-ITX JNC91-525-OC DUAL 1.8Ghz Glan

(0 Yorumlar)

Ürün Hakkında:
Sorularınız İçin

Fiyat:
100.00 $ /Adet
İndirim:
% 40
İndirimli fiyat:
60.00 $ /Adet

Miktar:
(0 Available)

Toplam fiyat:

Paylaş:
Ürün Değerlendirmesi
Merpazar.com | Endüstriyel Çözümler
(0 Customer reviews)

Specification
Jetway NC9I Mini-ITX Motherboard
Processor2nd Generation Intel® Atom Dual Core D525 (1.80GHz@13W)
ChipsetIntel NM10 (Formerly Tiger Point) @ 2.1W
Memory2 x 204-pin DDR3-1066/800 Single Channel SO-DIMM up to 4GB
GraphicsIntel GMA3150 Integrated Graphics
AudioRealtek ALC662 5.1 Channel Audio
LAN1 x Realtek RTL8111EVL PCI-E Gigabit LAN with Enhanced Surge Protection
Storage2 x SATA2 3Gb/s ports
Super IOFINTEK F71869A
Back Panel Connectors
1 12V DC Jack
1 PS/2 Mouse
1 PS/2 Keyboard
1 Parallel
1 Serial port (RS232)
1 VGA (up to 2048x1536)
4 USB 2.0
1 RJ45 LAN (10/100/1000)
3 3.5mm Audio
Onboard I/O Connectors
1 PCI Slot
1 PCI Express Mini Card Slot (full-size)
1 Serial header (RS232/RS422/RS485)
4 Serial header (RS232)
2 SATA2 3Gb/s Connectors
2 USB Pin Headers for up to 3 additional USB 2.0 Ports
1 24-bit Single Channel LVDS header/inverter
1 9-pin Audio header
1 HDMI-SPDIF header
1 GPIO header
1 Front Panel header
3 Fan headers
1 4-pin 12V ATX Power Connector for alternate internal power supply
1 4-pin Molex Power Output (Male)
Power Supply for NC9I
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND.
Internal Power Supply – the board can, alternatively, be powered by an internal ATX12V 2 x 2 power connector.
Based on power consumption test results, the recommended power rating is 60 W (12 V/5 A).

Caution: There is no isolation circuitry between the external 12 VDC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external 12 VDC jack is covered if the internal 2 x 2 power connector is to be used.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC

Bu ürün için henüz hiç yorum yapılmamış.